 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DC Converters TES 2N Series, 2 Watt Features Low profile SMD-package Wide 2:1 input voltage range I/O-isolation 1500 VDC Input filter meets EN55022, class A Operating temperature range -40C to +85C UL 60950-1 Short-circuit protection Qualified for leadfree reflow solder process according IPC J-STD-020C Available in tape and reel package 3-year product warranty The TES-2N series is a family of high performance 2W DC/DC converter modules featuring wide 2:1 input voltage ranges. The 28 models come in a low profile SMD package which requires just 3 cm2 space on the PCB. A high efficiency allows an operating temperature range of -40C to 85C. A built-in EMI input filter complies with EN 55022, class A. Typical applications for these converters are battery operated equipment, instrumentation, communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required. Models Ordercode TES 2N-0510 TES 2N-0511 TES 2N-0512 TES 2N-0513 TES 2N-0521 TES 2N-0522 TES 2N-0523 TES 2N-1210 TES 2N-1211 TES 2N-1212 TES 2N-1213 TES 2N-1221 TES 2N-1222 TES 2N-1223 TES 2N-2410 TES 2N-2411 TES 2N-2412 TES 2N-2413 TES 2N-2421 TES 2N-2422 TES 2N-2423 TES 2N-4810 TES 2N-4811 TES 2N-4812 TES 2N-4813 TES 2N-4821 TES 2N-4822 TES 2N-4823 http://www.tracopower.com Input voltage range Output voltage 3.3 VDC 5 VDC 12VDC 15 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC Output current max. 500 mA 400 mA 165 mA 135 mA 200 mA 85 mA 65 mA 500 mA 400 mA 165 mA 135 mA 200 mA 85 mA 65 mA 500 mA 400 mA 165 mA 135 mA 200 mA 85 mA 65 mA 500 mA 400 mA 165 mA 135 mA 200 mA 85 mA 65 mA Efficiency typ. 70 % 73 % 75 % 73 % 64 % 69 % 71 % 73 % 77 % 80 % 80 % 73 % 78 % 78 % 72 % 77 % 80 % 81 % 74 % 78 % 80 % 71 % 73 % 79 % 79 % 71 % 77 % 77 % Page 1 of 3 4.5 - 9.0 VDC (nominal 5 VDC) 9 - 18 VDC (nominal 12 VDC) 18 - 36 VDC (nominal 24 VDC) 36 - 75 VDC (nominal 48 VDC) DC/DC Converters TES 2N Series Input Specifications Input current at full load (nominal input) 5 12 24 48 5 12 24 48 Vin Vin Vin Vin Vin Vin Vin Vin models: models: models: models: models: models: models: models: 600 mA typ. 220 mA typ. 110 mA typ. 55 mA typ. 11 V max. 25 V max. 50 V max. 100 V max. EN 55022 level A, FCC part 15, level A 2% - Input variation Vin min. to Vin max. 0.5 % max. - Load variation 25 - 100 % 0.75 % max. dual output models: 2.0 % (balanced load) 50 mVpk-pk max 0.02 %/K indefinite, automatic recovery 25 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) 3.3 5 12 15 5 12 15 - Operating - Storage VDC VDC VDC VDC VDC VDC VDC output output output output output output output models: 2'200 F max. models: 1'000 F max. models: 170 F max. models: 110 F max. models: 470 F max. models: 100 F max. models: 47 F max. - 40 C to + 85 C - 55 C to + 125 C 3.5 %/K above 71 C 95 % rel. H max. >1.0 Mio h @ 25 C 1'500 VDC 250 pF >1`000 M Ohm 300 kHz (PFM) UL 60950-1, EN 60950-1, IEC 60950-1 CSA File No. 226037 http://directories.csa-international.org - Input/Output - Input/Output - Input/Output (500 VDC) 2 Watt Surge voltage (100 msec. max.) Conducted noise (input) Output Specifications Voltage set accuracy Regulation Ripple and noise (20 MHz Bandwidth) Temperature coefficient Short circuit protection Minimum load Capacitive load General Specifications Temperature ranges Derating Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217F ground benign) Isolation voltage (60sec) Isolation capacity Isolation resistance Switching frequency Safety standards Safety approvals All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TES 2N Series General Specifications Case material Weight Lead-free reflow solder process Moisture sensivity level (MSL) DAP (UL94V-0 rated) 3.8 g (0.13oz) as per IPC J-STD-020D as per IPC J-STD-033B MSL report level 2 www.tracopower.com/products/tes2n_msl-report.pdf 2 Watt Outline Dimensions 24.0 (0.94) 0.25 (0.01) 8.0 (0.31) 0 - 4 1.0 (0.04) 0.15 Pin-Out 16 top view 10 9 13.7 (0.54) 18.1 (0.71) Pin 1 7 8 Dimensions in [mm], () = Inch Tolerances 0.25 (0.01) Pin pitch tolerances 0.05 (0.002) 9 10 16 Single -Vin (GND) No con. No con. +Vout -Vout +Vin Dual -Vin (GND) No con. Common +Vout -Vout +Vin 1 7 8 3.11 (0.12) 15.24 (0.60) 2.54 (0.10) Outline Dimensions mm (inches) 1.4 (0.055) min. (0.11) (0.11) 3.11 (0.12) 15.24 (0.60) 2.54 (0.10) http://www.tracopower.com 2.8 13.7 (0.54) 2.8 Page 3 of 3 DC/DC Converters TES 2N Series Packaging Standard Packaging - Tube 6.5 10.0 0.7 15.3 270.0 {2.0 2 Watt 3.5 1.5 13.5 20.8 2.0 8.5 - 1 Tube contains 10 converters 2.0 -0 +1.0 54.4 Optional Packaging - Tape & Reel - Specifications according IEC 286-3 - 1 Reel contains 350 Converters - Use appendix -TR on order code 330.0 100.0 4.0 1.75 1. 5 2.00 20.2 44.0 13.0 0.25 1.7 1.5 8.2 28.0 8.5 50 6 Specifications can be changed any time without notice 50 18.3 Dimensions in [mm], Tolerance 0.1mm Rev. 09/08 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43 311 45 11 * Fax +41 43 311 45 45 * info@traco.ch * www.tracopower.com Page 4 of 3 24.30 50 6 |
Price & Availability of TES2N-0510
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |